Pipe Lagging

Revolve Asbestos Solutions: Specialists in Asbestos Pipe Lagging Solutions

At Revolve Asbestos Solutions, we are experts in dealing with the specific challenges posed by pipe lagging in older buildings and structures. Our specialisation includes the handling and removal of asbestos pipe lagging, a common material used historically for insulation purposes. We understand the risks associated with asbestos lagging around pipes and are dedicated to providing safe, effective solutions for its removal and management.

Comprehensive Asbestos Pipe Lagging Removal Services

Our team is highly skilled in asbestos pipe lagging removal, employing the latest techniques and adhering to strict safety protocols. We recognise the complexities involved in removing asbestos from pipe lagging, especially in confined or hard-to-reach areas. Our approach is meticulous and thorough, ensuring that all asbestos materials are removed safely and efficiently, minimising risk to building occupants and our staff.

Dedicated to Safe and Effective Asbestos Management

Choosing Revolve Asbestos Solutions means partnering with a team committed to your safety and the safety of your environment. We not only focus on the removal of asbestos lagging but also provide comprehensive inspections and consultations to assess the presence and extent of asbestos in your property. Our commitment to safety and adherence to regulatory guidelines makes us a trusted partner in asbestos pipe lagging management. Trust us to handle your asbestos concerns with professionalism and care.

Pipe Lagging

Get a quote

Tell us a bit about what you need and we can get back to you.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Get a quote

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Get a quote

Tell us a bit about what you need and we can get back to you.

What are you interested in?

Im looking for...

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Asbestos pipe insulation and lagging can be one of the most dangerous forms of asbestos, but it’s also one of the easiest types to identify. This form of asbestos is usually wrapped around piping and can be unmistakeable once you know what you’re looking for.

However, it can sometimes be in poor condition. This is what makes it dangerous, as the asbestos may already be disturbed, causing the dangerous microscopic fibres to be released into the air.

Therefore, we’d advise you not approach it. Instead, contact certified asbestos experts for advice instead.

What does Asbestos Pipe Insulation and Lagging look like?

The appearance of asbestos on pipes and lagging can vary. It was used extensively to insulate pipework and protect it from cold / heat.

It can often appear fluffy or smooth. Or it could look like lumpy dried cement or even a build-up of dust. If you notice anything like this on pipes or lagging, call a specialist and don’t interact with it yourself. Asbestos insulation can also appear like paper, card or even felt.

It’s most dangerous when frayed or damaged, as the dangerous microscopic fibres may have been released into the air. They could still be there and in the surrounding area. If this is the case, then do not approach it, instead call the experts for removal.

When was Asbestos Pipe Insulation and Lagging used?

As of the year 2000, asbestos has been declared illegal, so it has not been used as lagging or insulation since. However, in the 20th century, it was used extensively. This includes during the 1970s, a period in which many NZ homes and buildings were constructed.

Over the 1980s, the use of asbestos diminished as more details came to light about the dangers it posed. However, a large amount of asbestos still exists in buildings up and down the country. It also still remains in both commercial buildings and homes.

Why was Asbestos Pipe Insulation and Lagging used?

Asbestos has been used in many construction projects throughout New Zealand and in a variety of different ways. Something that makes it difficult to eradicate completely.

Asbestos was often called a ‘magic material’ by many in the construction trade. Due to this it was used in high quantities. Of course, this was before the health risks were discovered.

Asbestos can be a highly effective insulation material. This is why it was used on pipes and similar things—it kept them dry and in good condition for longer periods of time. It was also affordable and easy to use.  

Is Asbestos Pipe Insulation and Lagging dangerous?

Asbestos is only dangerous when the material is disturbed. If the material is visibly frayed or patchy, this could mean it has been. Therefore, we’d suggest you avoid it at all costs.

If not, the dangerous particles can be inhaled. If this happens, it can cause a variety of nasty respiratory disorders over time. This includes cancer of the lungs.

Insulating and lagging on pipes that is in good condition and undisturbed poses little risk. If your pipes are still in good condition, but you suspect they are covered in asbestos insulation, contact Revolve Asbestos Solutions to safely test and remove the lagging.

Get a Quote